Equipment

Features

Photos

• 6 ft x 8 ft boom mounted.
• LPG fuel
• Vaporizer for cold weather operation
• 1 million btu output
• Working area on boom 6 ft x 16 ft or 8 ft x 12 ft without moving the truck
• Heating panel rotates 45 degrees each way
• Side shift 4 feet in each direction
• Two piece hydraulic scarifier
• Electronic Ignition and flame safety.
• Low fire / high fire or timed cycle operation.
• Heats to 4 cm / 100 C. in 8 minutes

• 3.2 cubic metre capacity (4 tonne)
• screw conveyor discharge ( heavy duty 150 mm, hydraulic driven)
• 2 of 75000 btu infrared burners with electronic ignition and flame safety.
• Double temperature controls automatically maintain temperature.
• Lower section is a tank filled with heat transfer oil to maintain a constant temperature under the conveyor.
• Exhaust gases from the burners pass through the triple walled enclosure to effect efficient heat transfer.
• Top doors are opened hydraulically.

• Hydraulically dumped waste bin, .5 cubic metre capacity.
• Auxiliary hydraulic connection ( 8 metre hoses) 8 gpm at 2200 psi for hydraulic breakers, tampers or other accessories.
• Roller transport lift for optional single drum Wacker roller.
• Spill proof shovel cleaning tank
• Solvent storage and pump with wand for cleaning.
• Heated emulsion tank with reversible pump, hose reel and wand.
• Water tank
• Large cabinet for tools and/or clothing.
• Safety arrow board lighting

• Rugged Canbus control system minimizes wiring and hoses while providing a programmable interface that is fully self diagnostic.
• Pressure and flow compensated pump operates at low pressure standby reducing load and heat generated until a load is sensed when it will increase to 2200 psi.
• 9.5 gpm at 220 psi with the truck engine idling.
• 30 gpm at full throttle.
• Full filtration, pressure and return
• Cooler with electric fan, thermostatically controlled

• As shown, Sterling C8000, 15000 GVW, air brakes, Cummins 210 hp dsl, Allison 6 speed automatic.
• Any other 15000 gvw chassis at the customer choice.
• We will mount on your chassis (15000 gvw, 150 inch cab to axle)

May be equipped with

• hydraulic breaker
• larger (100 gal) heated and insulated emulsion tank
• extended screw conveyor (beyond rear of heating panel)